Start a Project
Call Us
Call Us

Surface Style: End Grain

Finish Selection Guide

Select a finish based on how the surface will be used and maintained over time.

Mineral Oil & Organic Beeswax

Best for: Frequent chopping
Maintenance: Frequent, easy
Feel: Soft, natural matte
Repairability: Excellent

Pure Tung Oil

Best for: Infrequent chopping
Maintenance: Periodic, more involved
Feel: Satin, warmer tone
Repairability: Good

Rubio Monocoat™

Best for: General use surfaces
Maintenance: Low
Feel: Matte, raw wood appearance
Repairability: Localized repairs possible

Impermio™ Film Finish

Best for: High moisture / heavy use
Maintenance: Minimal
Feel: Sealed, protected surface
Repairability: Not spot-repairable

How to Choose

  • Choose Mineral Oil & Organic Beeswax for active chopping surfaces that can recover from wear over time
  • Choose Pure Tung Oil for reduced maintenance with occasional cutting and a warmer, naturally evolving appearance 
  • Choose Rubio Monocoat™ for low-maintenance, general-use surfaces without direct cutting
  • Choose Impermio™ Film Finish where moisture resistance and long-term protection are the priority

View Full Finish Guide →

Edge Profile Guide

Use this guide to compare available edge profiles. Final shaping may vary slightly based on thickness and project requirements.

Drawings are shown on 1 ½” thick material for reference. Profiles may appear slightly different on thicker pieces.

Standard

Squared
   

Eased
1/16" Radius

Pencil
1/8" Radius

Small Roundover 3/16" Radius

Medium Roundover 1/4" Radius

Large Roundover
3/8" Radius

Extra-Large Roundover
1/2" Radius

Bevel

High Design

These profiles require additional shaping and may affect final pricing.

Bias

Shark Nose

Sting Ray

Drift

Crescent

Reverse Demi

Traditional

These profiles require additional shaping and may affect final pricing.

Bullnose

Roman Ogee

Traditional Ogee

Cove and Bead

Roundover with Bead

Looking for a custom edge profile?

We can create many custom profiles beyond the options shown here. Some can be made with existing tooling, while others may require custom tooling, additional design time, and added cost. Contact us before ordering if you have a specific profile in mind.