Rubio Monocoat Tannin Remover – 125ml

$20.99

Rubio Monocoat Tannin Remover is a ready-to-use product that effectively removes black spots and stains from wood.

These black spots are caused by a reaction to the tannin that is naturally found in wood and water and tend to occur when wood comes into contact with moisture and metal.

Rubio Monocoat Tannin Remover is formulated for fast and effective removal of spots and discoloration without causing damage to the wood.

Instructions:

  1. Spray RMC Tannin Remover on the spot or stain.
  2. Allow several minutes for absorption.
  3. Use a damp cloth to remove the stain.
  4. To remove stubborn stains, it is recommended to repeat the process until the desired result is achieved.
  5. Allow the surface area to dry.
  6. If the protective layer is affected: treat the surface area again with Oil Plus 2C in your original finish color.

 

We highly recommend that you first test the product on a non-visible part of the wood, to test the effect of the product on your specific wood type.

We can not be responsible for any unintended consequences due to incorrect use.

STORAGE:
The product can be stored for up to 24 months. Store in dry conditions and in the original packaging. Do not allow to freeze.

Finish Selection Guide

Select a finish based on how the surface will be used and maintained over time.

Mineral Oil & Organic Beeswax

Best for: Frequent chopping
Maintenance: Frequent, easy
Feel: Soft, natural matte
Repairability: Excellent

Pure Tung Oil

Best for: Infrequent chopping
Maintenance: Periodic, more involved
Feel: Satin, warmer tone
Repairability: Good

Rubio Monocoat™

Best for: General use surfaces
Maintenance: Low
Feel: Matte, raw wood appearance
Repairability: Localized repairs possible

Impermio™ Film Finish

Best for: High moisture / heavy use
Maintenance: Minimal
Feel: Sealed, protected surface
Repairability: Not spot-repairable

How to Choose

  • Choose Mineral Oil & Organic Beeswax for active chopping surfaces that can recover from wear over time
  • Choose Pure Tung Oil for reduced maintenance with occasional cutting and a warmer, naturally evolving appearance 
  • Choose Rubio Monocoat™ for low-maintenance, general-use surfaces without direct cutting
  • Choose Impermio™ Film Finish where moisture resistance and long-term protection are the priority

View Full Finish Guide →

Edge Profile Guide

Use this guide to compare available edge profiles. Final shaping may vary slightly based on thickness and project requirements.

Drawings are shown on 1 ½” thick material for reference. Profiles may appear slightly different on thicker pieces.

Standard

Squared
   

Eased
1/16" Radius

Pencil
1/8" Radius

Small Roundover 3/16" Radius

Medium Roundover 1/4" Radius

Large Roundover
3/8" Radius

Extra-Large Roundover
1/2" Radius

Bevel

High Design

These profiles require additional shaping and may affect final pricing.

Bias

Shark Nose

Sting Ray

Drift

Crescent

Reverse Demi

Traditional

These profiles require additional shaping and may affect final pricing.

Bullnose

Roman Ogee

Traditional Ogee

Cove and Bead

Roundover with Bead

Looking for a custom edge profile?

We can create many custom profiles beyond the options shown here. Some can be made with existing tooling, while others may require custom tooling, additional design time, and added cost. Contact us before ordering if you have a specific profile in mind.