Monocoat Renew - 100ml

Current Stock:
Ships in 1-2 days

Rubio Monocoat Renew is a ready-to-use product that refreshes, restores and protects surfaces treated with Rubio Monocoat Oil Plus 2C.

Renew should be used when the surface feels too dry or rough, or when the finish has worn down due to heavy use. 

If color restoration is required, perform a renovation using Oil Plus 2C in the original color.


  • Brings the surface back to a freshly oiled state
  • Restores the depth and vibrancy of the color
  • Masks scratches in the surface as long as the surface is not damaged
  • No overlaps or starting marks
  • Minimal use/High coverage: ~1000 ft²/L.
  • Convenient: Surface use after 4 - 6 hours
  • A short ‘dry’ maintenance period: after 6 days, the surface can be cleaned with water and soap



An overview of instructions. Please consult the TDS for complete product information.

  1. Clean the surface using Rubio Monocoat Soap or Rubio Monocoat Surface Care Spray.
  2. Apply Rubio Monocoat Renew on to the surface to be treated. Use a minimal amount of the product to prevent the surface from becoming sticky.
  3. Allow the product to react for a couple of minutes.
  4. Wipe dry with a cloth, paper towel, or buffer with white pad.
  5. Perform a final wipe using an absorbing cloth, until the surface feels completely dry.
  6. Continue working in zones that can be fully wiped dry within 10 to 15 minutes.
*Combustion warning
Cloths, saturated with oil, may spontaneously combust. After usage, they need to be soaked in water before disposal.
No one has reviewed this product! Write a Review